BLUMAT DIGITAL
Optimal soil moisture value
The professional moisture sensor shows you the thirst of your plants at the touch of a button and gives 100% certainty when watering. Because with large pots, the moisture content of the soil is impossible to estimate with the eye. Blumat shows the suction power that the roots need to absorb water.
BLUMAT DIGITAL
Optimal soil moisture value
The professional moisture sensor shows you the thirst of your plants at the touch of a button and gives 100% certainty when watering. Because with large pots, the moisture content of the soil is impossible to estimate with the eye. Blumat shows the suction power that the roots need to absorb water.
BLUMAT DIGITAL
OPERATION
-
Unscrew measuring head
-
Soak plastic tube with ceramic tip in water for at least 15 minutes.
-
Fill plastic tube with tap water up to the brim.
-
Screw measuring head back on as far as it will go.
-
Then insert into the soil, about 15 to 18 cm deep in the outer part of the root, for potted plants 5 to 8 cm from the edge of the pot
A MEASUREMENT CAN BE TAKEN AFTER 2 TO 3 HOURS.
For newly repotted plants, insert the cone directly into the soft soil always rotating to the right and then press the soil down slightly. For newly repotted plants, insert the cone directly into the soft soil always rotating to the right and then press the soil down slightly.
In case of dense root growth or very hard soil, pierce a suitable hole in the outer part of the root. Fill the hole halfway up with loose earth and water. Then insert the Blumat Digital rotating to the right, fill the hole with soil and press down.